Sale!

Emtron KV16

Original price was: $4,080.00.Current price is: $3,468.00.

The Emtron KV16 is a wire-in ECU with 16 injector and 12 ignition outputs, fully sequential, for V8s with staged injection (16 injectors) and the most demanding builds. It has two built-in wideband controllers, 32 MB of logging and a 4-channel oscilloscope, and runs up to four drive-by-wire throttle bodies. Compare all Emtron ECUs.

SKU: 1122-162 Category: Brand:

Description

Emtron KV16 wire-in ECU

The Emtron KV16 is built for V8s with staged injection (16 injectors) and the most demanding builds. Specs below are from Emtron’s KV16 datasheet. To see it next to every other Emtron ECU, read my Emtron ECU comparison.

Key specs

  • 16 fuel injector outputs and 12 ignition outputs, fully sequential
  • Drives high or low impedance injectors, saturated or peak-and-hold (8 A peak, 4 A hold)
  • Two Bosch LSU 4.9 wideband controllers built in (0.58 to 10.0 lambda)
  • Drive-by-wire: up to 4 throttle bodies
  • 16 auxiliary outputs (boost, VVT, fans, pumps and more)
  • 16 analog inputs and 14 digital inputs, plus 2 crank and cam inputs (magnetic or Hall, OEM trigger patterns)
  • Up to 4 VVT cam position inputs
  • 2 knock channels with digital filtering
  • 2 CAN buses, Ethernet tuning connection
  • 32 MB onboard logging, over 1,200 channels at up to 500 Hz, plus a 4-channel oscilloscope
  • Onboard barometric sensor and 3-axis accelerometer
  • 120-way Super Seal (26/34/34/26-pin) connectors
  • CNC billet 6061 aluminium case, 134 x 162 x 27 mm, 730 g

How it compares

The Emtron KV12 has 12 injector outputs. The Emtron KV16M has the same outputs as the KV16 but adds eight more analog inputs (24) and waterproof 136-way Deutsch Autosport connectors for endurance and professional motorsport.

What else you need

Ignition: ignitor or smart coils

Emtron ignition outputs are logic-level, so they fire coils through an ignitor. On a Skyline GT-R the factory RB26 ignitor works as it is, and R35 or Audi R8 coils are smart coils with the ignitor built in, so no extra ignitor is needed.

Frequently asked questions

Does the Emtron KV16 have a built-in wideband controller?
Yes. It has two Bosch LSU 4.9 wideband controllers built in.

Can the KV16 run low-impedance injectors?
Yes. Every injector output can run saturated or peak-and-hold, so it drives high or low impedance injectors.

Does the KV16 need a separate MAP sensor?
Yes. It has a barometric sensor onboard but no MAP sensor, so add an external MAP sensor such as the Emtron 4 Bar MAP Sensor Kit.

What software tunes the KV16?
Emtune, Emtron’s free PC tuning software, over the Ethernet connection.

Questions?

Call me at (951) 708-1648 and I will help you pick the right ECU and parts. I am an Emtron dealer and tuner in Kyle, Texas, and I tune Emtron ECUs on my Dynapack hub dyno and remotely anywhere in the US.

Additional information

Weight 3 lbs
Dimensions 10 × 8 × 3 in
Fuel injector outputs

16

Ignition outputs

12

Injector drive

High or low impedance, saturated or peak-and-hold (8 A peak / 4 A hold)

Onboard wideband lambda

2 x Bosch LSU 4.9 controllers built in

Drive-by-wire throttle bodies

Up to 4

Auxiliary outputs

16

Analog inputs

16

Digital inputs

14

Knock channels

2

CAN buses

2

Tuning connection

Ethernet

Logging memory

32 MB

4-channel oscilloscope

Yes

Onboard barometric sensor

Yes

Connectors

120-way Super Seal (26/34/34/26-pin)

Processor

Dual 100 MHz

Size

134 x 162 x 27 mm

Weight

730 g

Operating voltage

6 to 22 V DC

There are no reviews yet.

Be the first to review “Emtron KV16”