Description
Emtron KV8 wire-in ECU
The Emtron KV8 is built for serious street and race builds of up to eight cylinders that want low-impedance injectors, built-in wideband and lots of I/O. Specs below are from Emtron’s KV8 datasheet. To see it next to every other Emtron ECU, read my Emtron ECU comparison.
Key specs
- 8 fuel injector outputs and 8 ignition outputs, fully sequential
- Drives high or low impedance injectors, saturated or peak-and-hold (8 A peak, 4 A hold)
- Two Bosch LSU 4.9 wideband controllers built in (0.58 to 10.0 lambda)
- Drive-by-wire: 2 throttle bodies
- 16 auxiliary outputs (boost, VVT, fans, pumps and more)
- 16 analog inputs and 14 digital inputs, plus 2 crank and cam inputs (magnetic or Hall, OEM trigger patterns)
- Up to 4 VVT cam position inputs
- 2 knock channels with digital filtering
- 2 CAN buses, Ethernet tuning connection
- 32 MB onboard logging, over 1,200 channels at up to 500 Hz, plus a 4-channel oscilloscope
- Onboard barometric sensor and 3-axis accelerometer
- 120-way Super Seal (26/34/34/26-pin) connectors
- CNC billet 6061 aluminium case, 134 x 162 x 27 mm, 730 g
How it compares
Compared with the Emtron SL8, the KV8 adds low-impedance injector drive, two built-in wideband controllers, a second throttle body, 16 aux outputs, 16 analog inputs and 14 digital inputs. The Emtron KV12 is the same case with 12 injector and 12 ignition outputs and up to four throttle bodies.
KV8 in a Skyline GT-R
The KV8 is the ECU in my Emtron R32, R33 and R34 GT-R Plugin ECU Kit. On the RB26 it runs all six cylinders with two spare injector and ignition outputs, and its two built-in wideband controllers read one sensor per turbo on a twin-turbo car. Emtron also makes plug-in harnesses (R32 and R33, R34) and GT-R mounting kits (R32, R33, R34).
What else you need
- Wiring: the KV Series Flying Lead Kit or the KV Series Connector Kit to build your own harness
- Mounting: the KV ECU Mounting Kit
- Tuning: the Emtron ECU Tuning Cable and the free Emtune software
- Wideband: one or two Bosch LSU 4.9 sensors. The controllers are built in, so no ELC is needed.
- MAP sensor: the Emtron 4 Bar MAP Sensor Kit. Emtron ECUs have a barometric sensor onboard but no MAP sensor.
- Air temperature: a fast-response intake air temperature sensor. I supply one; call me to add it to your order.
- Fuel and oil pressure: a Honeywell 150psi pressure sensor for each
- Ethanol content: the Continental Flex Fuel Sensor if you run E85 or flex fuel
- Knock: Bosch Motorsport wideband knock sensors
Ignition: ignitor or smart coils
Emtron ignition outputs are logic-level, so they fire coils through an ignitor. On a Skyline GT-R the factory RB26 ignitor works as it is, and R35 or Audi R8 coils are smart coils with the ignitor built in, so no extra ignitor is needed.
Frequently asked questions
Does the Emtron KV8 have a built-in wideband controller?
Yes. It has two Bosch LSU 4.9 wideband controllers built in.
Can the KV8 run low-impedance injectors?
Yes. Every injector output can run saturated or peak-and-hold, so it drives high or low impedance injectors.
Does the KV8 need a separate MAP sensor?
Yes. It has a barometric sensor onboard but no MAP sensor, so add an external MAP sensor such as the Emtron 4 Bar MAP Sensor Kit.
What software tunes the KV8?
Emtune, Emtron’s free PC tuning software, over the Ethernet connection.
Questions?
Call me at (951) 708-1648 and I will help you pick the right ECU and parts. I am an Emtron dealer and tuner in Kyle, Texas, and I tune Emtron ECUs on my Dynapack hub dyno and remotely anywhere in the US.




There are no reviews yet.