Description
Emtron Shadow 8 wire-in ECU
The Emtron Shadow 8 is built for up to eight cylinders on a budget, including builds with a GDI high-pressure fuel pump. Specs below are from Emtron’s Shadow 8 datasheet. To see it next to every other Emtron ECU, read my Emtron ECU comparison.
Key specs
- 8 fuel injector outputs and 8 ignition outputs, fully sequential
- Injectors: high impedance (saturated)
- Wideband lambda through an Emtron ELC1 or ELC2 CAN controller
- Drive-by-wire: 1 throttle body
- 12 auxiliary outputs (boost, VVT, fans, pumps and more)
- 10 analog inputs and 10 digital inputs, plus 2 crank and cam inputs (magnetic or Hall, OEM trigger patterns)
- Up to 4 VVT cam position inputs
- 2 knock channels with digital filtering
- 2 CAN buses, USB-C tuning connection
- 16 MB onboard logging, over 1,200 channels at up to 500 Hz
- Two GDI fuel pump control outputs
- 68-way Super Seal (2 x 34-pin) connectors
- CNC billet 6061 aluminium case, 152 x 139 x 26 mm, 520 g
How it compares
Shadow 8 or SL8? Both run eight cylinders. The Emtron SL8 adds 32 MB of logging (vs 16 MB), a 4-channel oscilloscope, an onboard barometric sensor and Ethernet. The Shadow 8 costs less, connects over USB-C, and adds two GDI fuel pump outputs and two more aux outputs. For low-impedance injectors or built-in wideband, look at the Emtron KV8.
What else you need
- Wiring: the Shadow 8 ECU Wiring Harness (all 68 pins, 2.5 m)
- Mounting: the Shadow 8 ECU Mounting Kit
- Tuning: the free Emtune software and a Shadow 8 USB tuning cable (USB-A or USB-C). Call me to add the cable or the AB connector kit to your order.
- Wideband: Emtron ELC1 for a single turbo, or Emtron ELC2 if you are keeping twin turbos, plus a Bosch LSU 4.9 sensor for each channel
- MAP sensor: the Emtron 4 Bar MAP Sensor Kit. Emtron ECUs have a barometric sensor onboard but no MAP sensor.
- Air temperature: a fast-response intake air temperature sensor. I supply one; call me to add it to your order.
- Fuel and oil pressure: a Honeywell 150psi pressure sensor for each
- Ethanol content: the Continental Flex Fuel Sensor if you run E85 or flex fuel
- Knock: Bosch Motorsport wideband knock sensors
Ignition: ignitor or smart coils
Emtron ignition outputs are logic-level, so they fire coils through an ignitor. On a Skyline GT-R the factory RB26 ignitor works as it is, and R35 or Audi R8 coils are smart coils with the ignitor built in, so no extra ignitor is needed.
Frequently asked questions
Does the Emtron Shadow 8 have a built-in wideband controller?
No. Add an Emtron ELC1 (one sensor, single turbo) or ELC2 (two sensors, twin turbo), which connect over CAN.
Can the Shadow 8 run low-impedance injectors?
No. Its injector outputs are for high-impedance (saturated) injectors. For low-impedance injectors, choose a KV series ECU.
Does the Shadow 8 need a separate MAP sensor?
Yes. Add an external MAP sensor such as the Emtron 4 Bar MAP Sensor Kit.
What software tunes the Shadow 8?
Emtune, Emtron’s free PC tuning software, over the USB-C connection.
Questions?
Call me at (951) 708-1648 and I will help you pick the right ECU and parts. I am an Emtron dealer and tuner in Kyle, Texas, and I tune Emtron ECUs on my Dynapack hub dyno and remotely anywhere in the US.

There are no reviews yet.