Link CAN connection cable for plug-in ECU’s (4pin)

The Link 300mm CANJST4 is required to add CAN communications & power to recently released G4X Plug-in ECU’s which have the new 4 Pin powered CAN connector (not the older 5 pin CAN connector). Plugs directly into the socket on the ECU PCB, provides CAN and a protected 12V supply to allow easy connection of CAN accessories. Suitable for powering a CAN Lambda, Dash, EGT amplifier or other similar low powered CAN devices which have a total continuous current draw of <3A

Description

Suitable Plug-ins are listed below:

214-4100 – Plug-in ECU G4X Nissan GTR with E-Throttle

217-4100 – Plug-in ECU G4X Nissan S15 with E-Throttle

233-4000 – Plug-in ECU G4X Honda S2000 AP1

228-4000 – Plug-in ECU G4X Subaru WRX V5-6

237-4000 – Plug-in ECU G4X Honda HC20X Type-R DC5/RSX

238-4000 – Plug-in ECU G4X Subaru WRX11

239-4000 – Plug-in ECU G4X MX5NB2X

240-4000 – Plug-in ECU G4X MX5NB1X

243-4000 – Plug-in ECU G4X WRX11 USDM

241-4200 – G5 ECU Plug-in – Toyota GT86/Subaru BRZ LHD

241-4000 – G5 ECU Plug-in – Toyota GT86/Subaru BRZ RHD

Additional information

Weight	.3 lbs
Dimensions	3 × 2 × 1 in

There are no reviews yet.

Be the first to review “Link CAN connection cable for plug-in ECU’s (4pin)”

You must be logged in to post a review.

Link CAN connection cable for plug-in ECU’s (4pin)

Description

Additional information

Policies

Contact

Hours

Link CAN connection cable for plug-in ECU’s (4pin)

Description

Additional information

Related products

Knock Sensor Harness for Plex Knock Monitor V2

Link ECU Pin Kit B

Link ECU Pin Kit A

Link ECU XS Expansion Loom – #XSL